Filter
Top Products
Management Commands 4 - 25
Active Hello Time 2
Active Forward Delay 15
Active Listen Time 20
Press CTRL-C to exit.
Example
This example displays protocol statistics every 30 seconds.
OEBM> monitor 0:30 protocols [ENTER]
3658 Seconds Since Clear Port 1 Port 2
Unicast Packets Received 0 0
Non-Unicast Packets Received 0 0
Unicast Packets Transmitted 0 0
Non-Unicast Packets Transmitted 0 0
Press CTRL-C to exit.
Description
The MONITOR command periodically displays the network and bridging
statistics for the channels to which the bridge is connected based on the
number of minutes and seconds you assign.
The {interval} value can be a maximum of 30:00 minutes and a minimum
of 0:05 seconds and is entered in the format mm:ss (e.g., 0:20 or 7:00).
The default is 5 minutes. The default parameter to be monitored is bridge
statistics.
Press the [CTRL-C] key combination to discontinue the statistics display and
return to the management prompt.