Filter
Top Products
3 - 22 ONline Ethernet Bridge Module Installation and Operation Guide
Statistics Parameters
Bridge Management statistics provide useful information regarding traffic
loading and error conditions. The following commands are used to display,
monitor, and clear statistics:
❑ SHOW
❑ MONITOR
❑ CLEAR
These commands are discussed briefly in the following paragraphs. Chapter
4 provides complete description and examples of these commands.
SHOW
The SHOW command displays current bridge attributes. You must use one
of the SHOW command parameters to display bridge attributes. Several of
the SHOW command parameters have parameters of their own.
Refer to SHOW command section in Chapter 4 for descriptions of all of the
SHOW command parameters.
MONITOR
The MONITOR command enables you to periodically display network
statistics for the bridge ports based upon the monitor rate that you
request. This command offers four options that display screens of statistics
similar to the SHOW command option screens.
The MONITOR command option screens are updated (based upon the
requested time) to show changes to the bridge as they occur. You may
want to use this command to keep a continuous display as to the status of
your Bridge Module and network once setup is complete.
Press the [CTRL-C] to discontinue the current MONITOR command and
return to the management prompt.