Filter
Top Products
Management Commands 4 - 99
SHOW COUNTER SPANTREE
Use the SHOW COUNTER SPANTREE command to display the statistical
counters for the Bridge Module spantree parameters.
Format
SHOW COUNTER SPANTREE
Parameters
none
Example
OEBM> show counter spantree [ENTER]
811 Seconds Since Clear Port 1 Port 2
Spanning Tree State FORWARDING FORWARDING
Spanning Tree Frames Received 0 177
Spanning Tree Frames Transmitted 177 0
Port Independent Statistics
Topology Change Count 3
Seconds Since Topology Changed 1736
Active Hello Time 7
Active Forward Delay 11
Active Listen Time 27
This bridge is the root bridge
Description
The SHOW COUNTER SPANTREE command displays the statistical counters
for Spanning Tree. If Spanning Tree is disabled, this screen will be blank.