Filter
Top Products
4 - 38 ONline Ethernet Bridge Module Installation and Operation Guide
SET BRIDGE AGEING_TIME
Use the SET BRIDGE AGEING_TIME command to set the rate at which
addresses are aged out of the dynamic filtering table.
Format
SET BRIDGE AGEING_TIME {parameter}
Parameter
{parameter} = 1 - 16,666 minutes (default is 5 minutes)
Example
The following example SETs the bridge ageing_time parameter to 17
minutes.
OEBM> set bridge ageing_time 17 [ENTER]
Ageing time parameter changed
Description
The SET BRIDGE AGEING_TIME command enables you to set the rate at
which addresses are aged out of the dynamic address filtering table. If a
node address has been in the table for one age period without any new
activity from the node, it is removed.
A rate change will take effect immediately for your current session. Issue
the SAVE BRIDGE command if you want the new rate to remain effective
after the next boot.
Note: This parameter does not affect addresses that have been
added to the static filter address table using the SET FILTER
STATIC_ADDRESS_TABLE command.