Filter
Top Products
Management Commands 4 - 61
SET FILTER STATIC_ADDRESS_TABLE
Use the SET FILTER STATIC_ADDRESS_TABLE command to add node
addresses to the static address table.
Format
SET FILTER STATIC_ADDRESS_TABLE {variable}
{MAC address}
Parameters
{variable} = always_forward
never_forward_to_port1
never_forward_to_port2
{MAC address} = XX-XX-XX-XX-XX-XX
Example
OEBM>set filter static_address_table never_forward_to_port1 [ENTER]
Enter MAC Address: 03-00-06-07-17-01 [ENTER]
Address added to filter table.
Do SAVE FILTER and RESET DEVICE to use changes.
Description
The SET FILTER STATIC_ADDRESS_TABLE command enables you to add
node addresses to the static address table.
Always_Forward Parameter
Specifying the Always_Forward parameter with a subsequent MAC address
will result in all received frames with the specified MAC address as the
destination address being bridged (to the other bridge port) by the Bridge
Module.