4 - 44 ONline Ethernet Bridge Module Installation and Operation Guide
SET DEVICE
Use the SET DEVICE command to change the Bridge Module device
configuration parameters.
Format
SET DEVICE {parameter}
Parameters
{parameter} = contact
default_gateway_port1
default_gateway_port2
diagnostics
ip_address_port1
ip_address_port2
location
name
password
sqe_mode
subnet_mask_port1
subnet_mask_port2
Description
The SET DEVICE command enables you change the Bridge Module
configuration parameters. To make changes permanent, issue the SAVE
DEVICE command. Use the SHOW DEVICE command to display the current
configuration information.
Since the parameters you can use with the SET DEVICE command have
parameters of their own, the following pages describe each parameter.