3Com 5102B-EE Network Router User Manual


 
Installation 2 - 5
Just pull the extractor lever down to remove the module from the
concentrator.
Table 2-1. Bridge Module LEDs, Button, and Connectors
Label Function
RX Indicates receive activity on the IEEE 802.3 or Ethernet
network connected to that port.
TX Indicates transmit activity on the IEEE 802.3 or
Ethernet network connected to that port.
FWD Indicates that the bridge is in forwarding state and is
sending packets from that port.
MGMT Indicates that administrator mode of the bridge is
currently active.
TEST Indicates Bridge Module self-test activity.
RESET Press this button to reset the Bridge Module. Same as
issuing the RESET command or plugging in the
module.
AUI Female AUI connector for 15-pin transceiver
connection.
RS-232 SERIAL
PORT
RS-232 port for connecting terminal, terminal server,
PC or modem for Management Interface.