Filter
Top Products
Management Commands 4 - 79
SET TERMINAL HANGUP
Use the SET TERMINAL HANGUP command to configure how a modem
connection is terminated when the LOGOUT command is entered during a
modem session.
Format
SET TERMINAL HANGUP {setting}
Parameters
{setting} = disable (default)
enable
Example
OEBM> set terminal hangup enable [ENTER]
Terminal parameter change
Description
The SET TERMINAL HANGUP command enables you to configure how a
modem connection is terminated when the LOGOUT command is entered
during a modem session.
If the HANGUP setting is enabled and you log out of the system, the
modem is automatically disconnected, closing down that connection.
The modem is also disconnected if this setting is enabled and you leave
your terminal unattended for the amount of time established by the
terminal TIMEOUT command. If the HANGUP setting is disabled and you
log out of the system, the modem is disconnected only when you explicitly
hang up the modem.
Note: If you do not hang up the modem, an unauthorized user
may pick up the last login session.