Firmware Download Instructions 6 - 11
Figure 6-6. ProComm Status Line Screen
8. Press [ENTER] to display the Password: prompt, and then log in to the
system with the administrator password. (Note that the MGMT LED
on the faceplate of the unit will light up.)
Note: Before you start the download procedure it is important to
note that the system will prompt you twice for the
Download command. You must enter the Download
command within 10 seconds of the prompts or the
following message is displayed and the download process
is aborted:
The Download command was not entered within 10 seconds.
Please enter the Download command again.
For a quick command reentry, press [CTRL-R]. This command
retypes the previous command string. If the download times-out
before you can enter the key sequence, repeat the Download
command and try again.
ALT-F10 VT-100 FDX 9600 N81 LOG CLOSED PRT OFF CR CR