Filter
Top Products
Index 5
Ping Command, 4-2, 4-26
Power-Up Self-Test, 5-2
Troubleshooting, 5-2
Precautionary Procedures
Electrostatic Discharge
, 2-1
ProComm
Diskettes
, 6-1
Reference Manual, 6-1
Software License, 6-1
ProComm Software
Installing
, 6-3
R
Remote Management, 3-19
Remote_Login Command, 3-19, 4-27
Requirements
Downloading Firmware
, 6-1
Reset Device Command, 4-29
returning products for repair, E-4
Revert Command, 4-30
RS-232 Cable, C-7
Cable Pin Chart, C-8
Connecting, 6-7
Guidelines, 2-14
RS-232 Port
Bridge Connection
, 2-14
S
Save Alert Command, 4-32
Save All Command, 4-32
Save Bridge Command, 4-32
Save Command, 3-9, 4-32
Save Community Command, 4-32
Save Device Command, 4-32
Save Filter Command, 4-32
Save Spantree Command, 4-32
Save Terminal Command, 4-32
Self-Test Diagnostics
Initiating
, D-1
LED Display, D-1
Screen Display, D-3
Set Bridge Ageing_Time Command, 4-38
Set Bridge Channel Command, 4-39
Set Bridge Command, 4-37
Set Bridge Dip_Configuration Command, 4-40
Set Bridge Side_Switch Command, 4-41
Set Command, 3-9, 4-34, 4-35
Set Community Command, 4-42
Set Device Command, 4-44
Set Device Contact Command, 4-45
Set Device Default_Gatew ay_Port1 Command,
4-4 6
Set Device Default_Gatew ay_Port2 Command,
4-4 7
Set Device Diagnostics Command, 4-48
Set Device IP_Address_Port1 Command, 4-49
Set Device IP_Address_Port2 Command, 4-50
Set Device Location Command, 4-51
Set Device Name Command, 4-52
Set Device Password Command, 3-13, 4-53
Set Device SQE_Mode Command, 4-55
Set Device Subnet_Mask_Port1 Command,
4-56
Set Device Subnet_Mask_Port2 Command,
4-57
SET FILTER Command, 3-20
Set Filter Command, 4-58
Set Filter Mode Protocol_ID_Table, 4-59
Set Filter Protocol_ID_Table Command, 4-60
Set Filter Static_Address_Table Command, 4-61
Set Spantree Bridge_Priority Command, 4-64
Set Spantree Command, 3-20, 4-63
Set Spantree Forward_Delay_Time Command,
4-65
Set Spantree Hello_Address Command, 4-67
Set Spantree Hello_Time Command, 4-68
Set Spantree Listen_Time Command, 4-70
Set Spantree Mode, 4-72
Set Spantree Path_Cost_Port1, 4-73
Set Spantree Path_Cost_Port2, 4-74
Set Terminal Baud Command, 4-76
Set Terminal Command, 4-75