Management Commands 4 - 13
CLEAR FILTER
Use the CLEAR FILTER command to clear an entry from the protocol id table
or the static address table. This command is only available in administrator
mode.
Format
CLEAR FILTER {parameter} {variable}
Parameters
{parameter} = protocol_id_table {protocol type}
static_address_table {MAC address}
Example
OEBM> clear filter protocol_id_table 0800 [ENTER]
Protocol ID deleted from filter table.
Do SAVE FILTER and RESET DEVICE to use changes.
Example
OEBM> clear filter static_address_table 03-00-06-07-17-01 [ENTER]
Address deleted from filter table.
Do SAVE FILTER and RESET DEVICE to use changes.
Description
The CLEAR FILTER command enables you to clear entries from the static
address table and the protocol id table.
It is recommended that you use the CLEAR FILTER command in conjunction
with the SHOW FILTER command to view filter table entries before you
clear them.
You must issue the SAVE FILTER and RESET DEVICE commands after
modifying the tables for the changes to take effect.