Filter
Top Products
4 - 88 ONline Ethernet Bridge Module Installation and Operation Guide
Table 4-2 describes the SHOW BRIDGE parameters.
Table 4-2. SHOW BRIDGE Command Attributes
Attribute Description
Ageing Time The rate at which addresses are aged out
of the dynamic filtering table.
Dip Configuration Determines whether the channel
configuration is read from the dip switch
settings or memory upon bridge reset.
Current Status The current state of the Bridge Module.
Protocols Supported The protocols that the Bridge Module
supports.
Port 1/2 Channel: Current The channels to which port 1 and port 2
of the Bridge Module are currently
bridging.
Port 1/2 Channel: Memory The channels to which port 1 and port 2
of the Bridge Module are configured
according to the values stored in
memory. These are the channels which
will be bridged if the Bridge Module is
reset and the Dip Configuration
parameter is disabled.
Port 1/2 Channel: Dip The channels which port 1 and port 2 are
configured according to the dip switch
settings. These are the channels which
will be bridged if the Bridge Module is
reset and the Dip Configuration
parameter is enabled.