Filter
Top Products
Management Commands 4 - 55
SET DEVICE SQE_MODE
Use the SET DEVICE SQE_MODE command to display SQE (heartbeat)
failures on the output from the MONITOR and SHOW commands.
Format
SET DEVICE SQE_MODE {parameter}
Parameters
{parameter} = normal (default)
ignore
Example
OEBM> set device sqe_mode ignore [ENTER]
SQE Mode parameter changed
Description
The SET DEVICE SQE_MODE command enables you to display SQE
(heartbeat) failures on the output from the MONITOR and SHOW
commands.
The default setting is Normal, where SQE failures are displayed. The other
SQE_MODE parameter is Ignore. Set SQE_MODE to Ignore if the front
panel AUI port is to be used with non-SQE transceivers.