Filter
Top Products
4 - 34 ONline Ethernet Bridge Module Installation and Operation Guide
SET
Use the SET command to change alert, bridge, community, device,
spantree, and terminal attributes. The SET command requires a parameter
to set specific attributes. This command is only available in administrator
mode.
Format
SET {parameter}
Parameters
{parameter} = alert
bridge
community
device
spantree
terminal
Description
The SET command enables you to change attributes for the alert, bridge,
community, device, spantree, and terminal parameters.
To save changes in EEPROM memory, use the SAVE command. To return to
the previously saved values, use the REVERT command.
The SET command parameters have parameters of their own. The
following pages describe these parameters in detail.