Filter
Top Products
4 - 104 ONline Ethernet Bridge Module Installation and Operation Guide
SHOW FILTER DYNAMIC_ADDRESS_TABLE
Use the SHOW FILTER DYNAMIC_ADDRESS_TABLE command to display
active entries in the dynamic address filter table at each of the bridge ports.
Format
SHOW FILTER DYNAMIC_ADDRESS_TABLE {port}
Parameters
{port} = port1
port2
Example
The following example displays the active entries in the dynamic filter table
for port 1.
OEBM> show filter dynamic_address_table port1 [ENTER]
00-00-0C-00-AD-E3 00-00-0C-00-EE-07
00-00-0C-01-17-6E 00-00-B5-08-03-57
02-60-8C-0D-E1-AF 02-60-8C-OE-89-E9
02-60-8C-3F-48-8B 02-60-8C-3C-CA-D9
Description
The SHOW FILTER command displays all dynamic entries since the last reset
which have not been “aged out”. Note that for ports that have no
addresses in the dynamic filtering table, the message “0 dynamic entries” is
displayed.