Filter
Top Products
4 - 48 ONline Ethernet Bridge Module Installation and Operation Guide
SET DEVICE DIAGNOSTICS
Use the SET DEVICE DIAGNOSTICS command to enable or disable
diagnostics during start-up (or reboot) of the Bridge Module.
Refer to the RESET DEVICE command description for more information
about the purpose of the Diagnostics parameter.
Format
SET DEVICE DIAGNOSTICS {setting}
Parameters
{setting} = disable
enable (default)
Example
OEBM> set device diagnostics disable [ENTER]
DIAGNOSTICS option disabled
Description
The SET DEVICE DIAGNOSTICS command allows you to enable or disable
diagnostics during start-up (or reboot) of the Bridge Module.