Filter
Top Products
Management Commands 4 - 97
SHOW COUNTER PROTOCOLS
Use the SHOW COUNTER PROTOCOL command to display the statistical
counters for the Bridge Module protocols. These counters reflect the
amount of traffic on the network.
Format
SHOW COUNTER PROTOCOLS
Parameters
none
Example
OEBM> show counter protocols [ENTER]
827 Seconds Since Clear Port 1 Port 2
Unicast Packets Received 0 0
Non-Unicast Packets Received 0 0
Unicast Packets Transmitted 0 0
Non-Unicast Packets Transmitted 0 0
Description
The SHOW COUNTER PROTOCOLS command displays the statistical
counters for the Bridge Module protocols.
These counters reflect the amount of traffic processed by the bridge as an
end station in the attached networks. This traffic will be composed of
remote_login sessions, SNMP frames, PING messages, and ARP frames.