Cable Pinouts C - 1
C
Cable Pinouts
This appendix describes the cable pinouts for both transceiver cables and
RS-232 cables. Also described in this appendix are some common problems
you may encounter with your transceiver cables and some suggested
solutions.
This appendix is divided into the following sections:
❑ Transceiver Cables
– Transceiver Cable Differences
❑ Cable Configuration Rules
– Cable Configuration
– Troubleshooting Transceiver Cables
❑ RS-232 Cables
Transceiver Cables
Figure C-1 illustrates the AUI connector on the front panel of the Bridge
Module and Table C-1 shows the proper pinouts for Ethernet V2.0, V1.0,
and IEEE 802.3 AUI cables.