Management Commands 4 - 107
SHOW FILTER STATIC_ADDRESS_TABLE
Use the SHOW FILTER STATIC_ADDRESS_TABLE command to display the
the MAC addresses in the static address table configured with the filter
type you specify.
Format
SHOW FILTER STATIC_ADDRESS_TABLE {variable}
Parameters
{variable} = always_forward
never_forward_to_port1
never_forward_to_port2
Example
This example shows the command used with the always_forward
parameter.
OEBM> show filter static_address_table always_forward [ENTER]
No entries of this address filter type found.
Description
The SHOW FILTER STATIC ADDRESS_TABLE command displays the MAC
addresses in the static address table configured with the filter type you
specify.