Filter
Top Products
Management Commands 4 - 101
SHOW DEVICE
Use the SHOW DEVICE command to display device-related information.
Format
SHOW DEVICE
Parameters
none
Example
OEBM> show device [ENTER]
ONline Ethernet Bridge Module (Bridge Module); SNMP
Management
Name: Bridge3
Boot EPROM Version:v1.3 Serial#:3658 Restarts:9
Flash EPROM Version: v2.00 Service Date: / /
Location:
Third Floor Engineering
Port 1 Port 2
MAC Address: 08-00-8F-10-13-48 08-00-8F-10-13-49
IP Address: 127.1.2.3 127.1.2.3
Subnet Mask FF.FF.FF.00 FF.FF.FF.00
Default Gateway 0.0.0.0 0.0.0.0
For assistance contact: Network Administrator
Diagnostics: ENABLED
SQE_Mode: NORMAL
Description
The SHOW DEVICE command displays the firmware version of the Bridge
Module and other device related information.