Filter
Top Products
6 - 12 ONline Ethernet Bridge Module Installation and Operation Guide
9. Type the following DOWNLOAD command and press [ENTER].
OEBM> maintain download out_of_band [ENTER]
Warning:
Download will erase your current operational code. You
will need the following to replace the software:
1. PC running Procomm communications software
2. 3Com ONline Bridge Module software media
If you are sure to want to do a download, enter the
Download command again within 10 seconds. Otherwise, this
sequence will be aborted.
OEBM>
10. Type [CTRL-R] within 10 seconds to reenter the complete Download
command.
11. The system will prompt you twice for the password (carriage return)
before the Download process will begin. Press [ENTER] at the
Password: prompts.
Please enter your password to begin the Download process
Password: [ENTER]
Please enter you password again
Password: [ENTER]
Preparing the bridge for download...
12. Once the message “Please enter the download sequence: <ALT> <F5>
<filename> <CR>” displays, press the key combination [ALT-F5]. The
ProComm Pop-Up Menu Screen displays, as shown in Figure 6-7.