Filter
Top Products
5-2 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 5
■ Creating an SNMPv3 Administrator
■ Configuring Views
■ Configuring Groups
■ Configuring an SNMPv3 User
■ Changing a User Password
■ Configuring SNMPv1 or v2 Community Strings
■ Setting the Administrative Contact
■ Setting the Physical Location of the Switch
■ Disabling or Reenabling SNMP
■ Viewing the SNMP Status
*Important: You must have administrator access to the switch to
use the CLI commands that are discussed in this
chapter.
RFC Standards For more information on SNMPv3, see:
■ RFC 2576, “Coexistence between Version 1, Version 2, and Version
3 of the Internet-Standard Network Management Framework.”
■ RFC 3411, STD 62, “An Architecture for Describing SNMP
Management Frameworks.”
■ RFC3412, STD 62 “Message Processing and Dispatching for the
Simple Network Management Protocol.”
■ RFC 3413, STD 62, “SNMP Applications.”
■ RFC 3414, STD 62, “User-Based Security Model (USM) for
Version 3 of the Simple Network Management Protocol
(SNMPv3).”
■ RFC 3415, STD 62, “View-Based Access Control (VACM) for the
Simple Network Management Protocol (SNMP).”
■ RFC3416, STD 62 “Version 2 of the Protocol Operations for the
Simple Network Management Protocol.”
■ RFC3417, STD 62, “Transport Mappings for the Simple Network
Management Protocol.”
■ RFC3418, STD 62, “Management Information Base (MIB) for the
Simple Network Management Protocol.”