Filter
Top Products
Document No. 10-300077, Issue 2 14-11
Configuring RIP Routing
Viewing RIP Statistics
You can view RIP statistics using either the Web Agent or the CLI.
Web Agent
Procedure
To view RIP statistics using the Web Agent:
1. In the navigation pane, expand the Routing > IP > RIP folders, and then
click Interface Statistics.
The RIP Interface Statistics Web page is displayed in the content pane.
See Figure 14-6.
Figure 14-6. RIP Interface Statistics Web Page
2. To modify your RIP statistics:
— Click CLEAR to reset all the entries.
— Click REFRESH to receive the most up-to-date information on
the entries.
3. Use Table 14-4 to interpret the RIP statistics:
Table 14-4. RIP Statistical Parameters
Parameter Defines the...
Interface Interface associated with the IP address specified.
State Current status of the RIP interface. UP indicates that
the interface is up and RIP can transmit and receive
updates.
IP Address IP address associated with the interface.
Triggered Updates
Sent
Number of RIP triggered updates sent.
Non-Triggered
Updates Sent
Number of RIP non-triggered updates sent.
1 of 2