A SERVICE OF

logo

Document No. 10-300077, Issue 2 8-17
Configuring Ports
Figure 8-5. Physical Port Configuration Web Page for the Gigabit
Ethernet Module
3. Click the checkbox in the Enable column to enable a port. A check mark
displays.
* Note: If the port is already enabled (check mark is visible), and you
want to disable the port, click the box to Disable the port (check
mark vanishes).
4. Click APPLY to save your settings, or CANCEL to restore previous
settings.
5. Select the port name from the Name field. The Detailed Physical Port
Configuration Web page is displayed. See Figure 8-6.