Filter
Top Products
Document No. 10-300077, Issue 2 17-9
Configuring the IPX RIP Protocol
CLI Command To interpret IPX RIP interface statistics using the CLI, enter the following
command from Interface mode:
(config-if <interface name>)# show ipx interface [<intf-
name>]
Table 17-3. IPX RIP Interface Statistical Parameters
Parameter Definition
Interface The IPX interface associated with this RIP interface.
State The current state of the RIP interface.
Network Number The network number of the IPX network associated
with the interface.
Triggered Updates Sent The number of triggered updates sent from the RIP
interface.
Non-triggered Updates
Sent
The number of non-triggered updates sent from the
RIP interface.
Updates Received The number of updates received. Updates may be
received periodically even if no changes have
occurred.
Requests Received The number of requests received on the RIP
interface.
Bad Packets Received The number of bad packets received on the RIP
interface.