Filter
Top Products
Document No. 10-300077, Issue 2 15-27
Configuring the OSPF Routing Protocol
Figure 15-14. LSA Detail Web Page
8. See Table 15-11 for an explanation of the LSA Detail Web page
parameters.
Table 15-11. LSA Detail Web Page Parameters
Parameter Definition
Area Displays the 32-bit identifier of the area from which the
LSA was received.
Type Displays the link state type. Types include:
• Router Links
• Network Links
• Summary Network
• Summary AS Border
• AS External
• Multicast Group
• NSSA External
LS ID Displays the link-state ID. The link-state ID is an LS type
specific field containing either a router ID or an IP address
that identifies the piece of the routing domain that is being
described by the advertisement.
Router ID Displays the router ID of the originator of the link state
advertisement.
Sequence Displays the link-state sequence number. The sequence
number is a 32-bit signed integer.
Checksum Displays the checksum of the complete contents of the
advertisement, except the age field.
Age Displays the time (in seconds) of the LSA.
1 of 2