Document No. 10-300077, Issue 2 5-17
Configuring SNMP
Removing a User from a Group
To remove an SNMPv3 user from a group, use the following CLI
command:
(configure)# no snmp-server user <username> group
<groupname>
Viewing Configured Users
To view the currently configured SNMPv3 users, use the following CLI
command:
# show snmp user [<username>]
This command displays the following information:
■ User name
■ Group to which the user belongs
■ Authentication protocol that is used for the authentication and
encryption passwords:
MD5, SHA, or None if authentication is not
enabled.
■ Localized authentication key of the user if authentication is enabled.
For information on localized keys, see “Authentication and
Encryption.”
■ State of encryption, Yes if enabled, or No if disabled.
■ Localized encryption key of the user if encryption is enabled. For
information on localized keys, see “Authentication and
Encryption.”
Deleting a User
To delete an SNMPv3 user, use the following CLI command:
(configure)# no snmp-server user <username>
