Filter
Top Products
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1 3-1
3
Configuring System
Information
Overview
You can manage system information by using either the Web Agent or the
CLI. The following procedures to manage your system information are
provided in this chapter:
■ Entering General System Information
■ Enabling the Simple Network Time Protocol
■ Setting Summer Time Hours
■ Setting the System Clock
■ Setting the Temperature System
■ Displaying the Power System Statistics
■ Displaying Cooling System Statistics
■ Performing a Reset
* Note: The last step in each procedure tells you to click Apply to save
the setup or changes that you made. This step saves the setup or
any changes to the running configuration only. The startup
configuration is not changed. Therefore, these and other
changes will be lost if the switch goes down or if you turn it off.
To save any changes to the startup configuration, you must copy
the running configuration to the startup configuration. For
information on how to perform this task, see “Copying
Configuration Files” in Chapter 2, “Setting Up the Switch.”
For more information about the CLI commands that are mentioned in this
chapter, see Command Reference Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1