Filter
Top Products
2 - 26
Chapter 2 Operation of Diag.
Tray 1 No Paper (DI-11)
1) Remove the Tray 1.
2) Turn on the power and enter the Diagnostic Mode.
3) Execute the DI-11.
4) Move the Actuator No Paper on the Paper Pickup Assembly to
check the sensor by finger.
Check the number on the control panel is counted up.
5) Press the “CANCEL” key to stop the test.
6) Reseat the Tray 1.
Sensor name (Diag. Code) Confirmation procedures
Operator Panel
Ida_Sec02_017FA
Actuator
4)