Filter
Top Products
3 - 21
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP1.4 IMAGING DRUM COVER (PL1.1.8), IMAGING DRUM COVER HINGE PIN
(PL1.1.21)
[Removal]
1) Remove TOP COVER FRAME. (RRP1.1)
2) Remove RIGHT SIDE COVER. (RRP1.7)
3) Remove LEFT SIDE COVER. (RRP1.12)
4) Pull out two IMAGING DRUM COVER HINGE PIN (PL1.1.21) to the left and right, that fix
IMAGING DRUM COVER to the printer.
5) Move bosses of the GUIDE FRAME DEVE L (PL7.1.21) and GUIDE FRAME DEVE R
(PL.7.1.22) that are fitted in the left and right grooves of IMAGING DRUM COVER, and
remove IMAGING DRUM COVER.
[Replacement]
1) Attach bosses of GUIDE FRAME DEVE L and GUIDE FRAME DEVE R in the left and right
grooves in IMAGING DRUM COVER.
2) Match two holes in IMAGING DRUM COVER with the holes in the printer, insert two IMAG-
ING DRUM COVER HINGE PIN into those holes to attach IMAGING DRUM COVER on the
printer.
3) Attach LEFT SIDE COVER. (RRP1.12)
4) Attach RIGHT SIDE COVER. (RRP1.7)
5) Attach TOP COVER FRAME. (RRP1.1)