Filter
Top Products
3 - 199
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP9.5 HARNESS ASSY INTERLOCK (PL9.1.11)
[Removal]
1) Remove TOP COVER FRAME. (RRP1.1)
2) Remove RIGHT SIDE COVER. (RRP1.7)
3) Remove DEVELOPER DRIVE ASSEMBLY. (RRP8.1)
4) Remove the connector (P/J161), that is connected to LOW VOLTAGE POWER SUPPLY
(LVPS), from HARNESS ASSY INTERLOCK
5) Remove HARNESS ASSY INTERLOCK from the printer.
[Replacement]
1) Attach HARNESS ASSY INTERLOCK to the printer.
2) Attach DEVELOPER DRIVE ASSEMBLY. (RRP8.1)
3) Pass the harness on HARNESS ASSY INTERLOCK through the clamp on DEVELOPER
DRIVE ASSEMBLY.
4) Attach the connector (P/J161), to be connected to the harness on HARNESS ASSY
INTERLOCK, to LOW VOLTAGE POWER SUPPLY (LVPS).
5) Attach RIGHT SIDE COVER. (RRP1.7)
6) Attach TOP COVER FRAME. (RRP1.1)