Filter
Top Products
2 - 28
Chapter 2 Operation of Diag.
Tray 3 No Paper (DI-13)
1) Remove the Tray 3.
2) Turn on the power and enter the Diagnostic Mode.
3) Execute the DI-13.
4) Move the Actuator No Paper on the Paper Pickup Assembly of
Tray 3 to check the sensor by finger.
Check the number on the control panel is counted up.
5) Press the “CANCEL” key to stop the test.
6) Reseat the Tray 3.
Sensor name (Diag. Code) Confirmation procedures
Ida_Sec02_020FA
Actuator
4)
Operator Panel
Ida_Sec02_021FA
Actuator
4)
Operator Panel