Filter
Top Products
2 - 50
Chapter 2 Operation of Diag.
Toner Motor Y (DO-48)
Toner Motor M (DO-4a)
Toner Motor C (DO-4c)
Toner Motor K (DO-4e)
NOTE: Be sure to install the Toner Cartridges to the printer at this
confirmation.
NOTE: The following procedures are for the technical staff. The
customer check is procedures 2, 3 and 4.
1) Remove the Right Side Cover. (Refer to RRP.)
2) Turn on the power and enter the Diagnostic Mode.
3) Execute the DO-48, DO-4a, DO-4c or DO-4e. Confirm the
rotation of the gear attached to the toner motor. (The customer
can confirm the motor noise only.)
4) Press the “CANCEL” key to stop the test.
5) Turn off the power.
6) Reinstall the Right Side Cover. (Refer to RRP.)
Motor, Clutch and Solenoid
name (Diag. Code)
Confirmation procedures
Ida_Sec02_041FA
Toner Motor Y
Toner Motor M
Toner Motor C
Toner Motor K