Filter
Top Products
3 - 37
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP1.12 LEFT SIDE COVER (PL1.1.30)
[Removal]
1) Remove TOP COVER FRAME. (RRP1.1)
2) Remove a screw (silver, 6mm) that fixes LEFT SIDE COVER.
3) Release a hook on the front side that fix LEFT SIDE COVER.
4) Remove LEFT SIDE COVER to the printer.
[Replacement]
1) Put the projection on the lower part of LEFT SIDE COVER in the groove on the printer.
2) Fix a hook on the front side of LEFT SIDE COVER to the printer.
3) Attach that fixes LEFT SIDE COVER using a screw (silver, 6mm).
4) Attach TOP COVER FRAME. (RRP1.1)