Filter
Top Products
3 - 69
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP3.11 SOLENOID FEED (PL3.3.11)
[Removal]
1) Remove PAPER FEEDER. (RRP3.3)
2) Remove PAPER PICKUP ASSEMBLY. (RRP3.7)
3) Remove the connector (P/J474) of the harness that is connected to SOLENOID FEED.
4) Remove a screw (silver, 6mm) that fixes SOLENOID FEED to PAPER PICKUP ASSEMBLY,
and remove SOLENOID FEED.
[Replacement]
1) Match the holes of SOLENOID FEED with the bosses mounted at two locations on PAPER
PICKUP ASSEMBLY, attach SOLENOID FEED to PAPER PICKUP ASSEMBLY using a
screw (silver, 6 mm).
2) Attach the connector (P/J474) of the harness that is connected to SOLENOID FEED.
3) Attach PAPER PICKUP ASSEMBLY. (RRP3.7)
4) Attach PAPER FEEDER. (RRP3.3)