Filter
Top Products
3 - 125
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP5.10 OUTPUT TRAY FULL SENSOR (PL5.4.1)
[Removal]
1) Remove FRONT COVER. (RRP1.3)
2) Remove OUTPUT TRAY ACTUATOR. (RRP5.12)
3) Remove the hooks at three locations that fix OUTPUT TRAY FULL SENSOR to OUTER
DUPLEX ASSEMBLY (PL5.3.1).
4) Remove the connector (P/J134) from OUTPUT TRAY FULL SENSOR, remove OUTPUT
TRAY FULL SENSOR.
[Replacement]
1) Attach the connect or (P/J134) to SENSOR PHOTO:FULL STACK.
2) Match the hooks at three locations of OUTPUT TRAY FULL SENSOR with the holes in
OUTER DUPLEX ASSEMBLY, attach OUTPUT TRAY FULL SENSOR to OUTER DUPLEX
ASSEMBLY by locking the hooks.
3) Attach OUTPUT TRAY ACTUATOR. (RRP5.12)
4) Attach FRONT COVER. (RRP1.3)