Filter
Top Products
8 – 10
Chapter 8 Printer Specifications
4.11 FPOT (First Print Output Time)
FPOT of the printer is shown in the table below.
The time required for the first sheet of paper to be delivered after the START command is given is
calculated on the following conditions (rounded to one decimal place).
- IOT performance that the controller does not have IOT wait.
- IOT is in the two Standby modes
- ROS Motor Ready (at operating) and Fuser Ready temperature: ROS RDY mode
- ROS Motor Off (at stopping) and Fuser Ready temperature: ROS OFF mode
- Paper is A4/Letter SEF.
- Except when process control is operating
Simplex Printing
Duplex Printing
Process speed
FPOT (sec)
MPF Tray 1 (Standard)
ROS RDY ROS OFF ROS RDY ROS OFF
B/W full speed mode 5.1 9.6 5.4 9.9
Color full speed mode 5.7 10.2 6.0 10.5
Medium speed mode 8.7 14.5 9.2 15.0
Low speed mode 12.5 18.8 13.2 19.5
Process speed
FPOT (sec)
Tray 2 (Option Feeder) Tray 3 (Option Feeder) Tray 4 (Option Feeder)
ROS RDY ROS OFF ROS RDY ROS OFF ROS RDY ROS OFF
B/W full speed mode 5.9 10.4 6.4 10.9 6.9 11.4
Color full speed mode 6.6 11.1 7.2 11.7 7.8 12.3
Medium speed mode 10.2 16.0 11.2 17.0 12.2 18.0
Low speed mode 14.7 21.0 16.2 22.5 17.6 23.9
Process speed
FPOT (sec)
MPF Tray 1 (Standard)
ROS RDY ROS OFF ROS RDY ROS OFF
B/W full speed mode 8.5 13.0 8.8 13.3
Color full speed mode 9.7 14.2 10.0 14.5
Medium speed mode 14.7 21.5 15.2 22.0
Low speed mode 21.0 29.3 21.7 30.0
Process speed
FPOT (sec)
Tray 2 (Option Feeder) Tray 3 (Option Feeder) Tray 4 (Option Feeder)
ROS RDY ROS OFF ROS RDY ROS OFF ROS RDY ROS OFF
B/W full speed mode 9.3 13.8 9.8 14.3 10.3 14.8
Color full speed mode 10.6 15.1 11.2 15.7 11.8 16.3
Medium speed mode 16.2 23.0 17.2 24.0 18.2 25.0
Low speed mode 23.2 31.5 24.7 33.0 26.1 34.4