Filter
Top Products
3 - 73
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP3.13 CHUTE UPPER (REFERENCE ONLY)
[Removal]
The hooks at two locations of CHUTE UPPER are positioned on the top surface of
PAPER PICKUP ASSEMBLY when looking from the rear side with 500 SHEET PAPER
TRAY and COVER 500 SHEET PAPER TRAY removed.
1) Pull out 500 SHEET PAPER TRAY from the printer.
2) Remove PAPER TRAY COVER. (RRP3.2)
3) Release the hooks at two locations that fix CHUTE UPPER to PAPER PICKUP ASSEMBLY,
slide CHUTE UPPER to the back first, release four hooks, then remove CHUTE UPPER
downward.
[Replacement]
1) Engage four hooks of PAPER PICKUP ASSEMBLY to four holes of PAPER PICKUP
ASSEMBLY, fix the hooks at two locations to attach PAPER PICKUP ASSEMBLY.
2) Attach PAPER TRAY COVER. (RRP3.2)
3) Insert 500 SHEET PAPER TRAY into the printer.