Filter
Top Products
3 - 61
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP3.7 PAPER PICKUP ASSEMBLY (PL3.3.1)
[Removal]
1) Remove PAPER FEEDER. (RRP3.3)
2) Remove PAPER FEEDER CHUTE. (RRP3.1)
3) Remove SWITCH ASSY SIZE. (RRP3.4)
4) Loosen the harness of PAPER PICKUP ASSEMBLY from the harness guide of FEEDER R
(PL3.2.6).
5) Remove two screws (silver, tap, 10mm) that fixes PAPER PICKUP ASSEMBLY to PAPER
FEEDER.
6) Lift up PAPER PICKUP ASSEMBLY from PAPER FEEDER and remove it.
[Replacement]
1) Match the hole of PAPER PICKUP ASSEMBLY to the bosses located at the left and right of
PAPER FEEDER, and attach it.
2) Attach PAPER PICKUP ASSEMBLY to PAPER FEEDER using two screws (silver, tap,
10mm).
3) Put the harness of PAPER PICKUP ASSEMBLY into the harness guide of FEEDER R.
4) Attach SWITCH ASSY SIZE. (RRP3.4)
5) Attach PAPER FEEDER CHUTE. (RRP3.1)
6) Attach PAPER FEEDER. (RRP3.3)