Filter
Top Products
3 - 31
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP1.9 MULTIPURPOSE FEEDER (MPF) TRAY (PL1.1.23)
[Removal]
1) Remove LEFT FRONT COVER. (RRP1.11)
2) Open MULTIPURPOSE FEEDER (MPF) COVER (PL1.1.25).
3) Opening the left and right slots of MULTIPURPOSE FEEDER (MPF) COVER outward, pull
out the right and left bosses of MULTIPURPOSE FEEDER (MPF) TRAY.
4) Release the latch and open OUTER DUPLEX ASSEMBLY (PL5.3.1).
5) Turn HOLDER TRAY L (PL1.1.29) located at the left base of OUTER DUPLEX ASSEMBLY
clockwise to remove it.
6) Remove the left side boss of MULTIPURPOSE FEEDER (MPF) TRAY, pull out and remove
the right side boss.
[Replacement]
1) Insert the right side boss of MULTIPURPOSE FEEDER (MPF) TRAY into HOLDER TRAY R
(PL1.1.24).
2) Insert HOLDER TRAL L into the left base of OUTER DUPLEX ASSEMBLY and fix the left
side boss of MULTIPURPOSE FEEDER (MPF) TRAY.
3) Attach HOLDER TRAY L by turning it counterclockwise.
4) Close OUTER DUPLEX ASSEMBLY.
5) Opening the left and right slots of MULTIPURPOSE FEEDER (MPF) COVER outward, fix
the left and right bosses of TRAY MSI BASE.
6) Attach LEFT FRONT COVER. (RRP1.11)