Filter
Top Products
1 – 6
Chapter 1 Troubleshooting
2. Level 1 FIP
2.1 Level 1 FIP
The level 1 FIP is the first step for trouble diagnosis. The level 1 FIP isolates the presence of various
troubles including error codes, and the level 2 FIP provides a guide for proceeding of the
troubleshooting.
2.2 Flow of Level 1 FIP
Before commencing Troubleshooting, verify or fix the following general matters first.
Yes
If not
Verify the type and size of the
print media installed meet the
specifications.
Reinstall the print media fall
within the print media guidelines.
Yes
If not
Verify that the settings of the
printer for the type and size of
the print media are correct.
Reset the printer settings.
Yes
Reinstall the Fuser Assy, BTR
Assy, PHD Assy and four
TONER Cartridges to the printer.
If not
Inspect there is no damage on
the tabs for safety interlock of
the Covers and Doors.
Replace the damaged parts.
Yes
Remove the paper jams from
the printer.
Yes
If not
Verify the scraps of paper,
staples, paper-clips and so on
are not remained in the printer.
Remove the remaining obstacles.
Yes When a paper
is jammed
Go to FIP.
Go to FIP.