Filter
Top Products
3 - 117
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP5.7 MULTIPURPOSE FEEDER (MPF) PAPER SENSOR (PL5.3.14)
[Removal]
1) Remove FUSER. (RRP5.1)
2) Remove TRANSFER ROLLER. (RRP5.2)
3) Remove TOP COVER FRAME. (RRP1.1)
4) Remove FRONT COVER. (RRP1.3)
5) Remove RIGHT FRONT COVER. (RRP1.8)
6) Remove LEFT FRONT COVER. (RRP1.11)
7) Remove RIGHT SIDE COVER. (RRP1.7)
8) Remove LEFT SIDE COVER. (RRP1.12)
9) Remove COVER ASSY REAR. (RRP1.5)
10) Remove MULTIPURPOSE FEEDER (MPF) TRAY. (RRP1.9)
11) Remove OUTER DUPLEX ASSEMBLY. (RRP5.18)
12) Remove MULTIPURPOSE FEEDER (MPF) ACTUATOR. (RRP5.8)
13) Release the hook that fixes MULTIPURPOSE FEEDER (MPF) PAPER SENSOR to OUTER
DUPLEX ASSEMBLY, remove MULTIPURPOSE FEEDER (MPF) PAPER SENSOR with the
harness.
14) Remove the connector (P/J135) from MULTIPURPOSE FEEDER (MPF) PAPER SENSOR,
remove MULTIPURPOSE FEEDER (MPF) PAPER SENSOR.
[Replacement]
1) Attach the connector (P/J135) to MULTIPURPOSE FEEDER (MPF) PAPER SENSOR.
2) Attach MULTIPURPOSE FEEDER (MPF) PAPER SENSOR to OUTER DUPLEX
ASSEMBLY.
3) Attach MULTIPURPOSE FEEDER (MPF) ACTUATOR. (RRP5.8)
4) Attach OUTER DUPLEX ASSEMBLY. (RRP5.18)
5) Attach MULTIPURPOSE FEEDER (MPF) COVER. (RRP1.10)
6) Attach MULTIPURPOSE FEEDER (MPF) TRAY. (RRP1.9)
7) Attach COVER ASSY REAR. (RRP1.5)
8) Attach LEFT SIDE COVER. (RRP1.12)
9) Attach RIGHT SIDE COVER. (RRP1.7)
10) Attach LEFT FRONT COVER. (RRP1.11)
11) Attach RIGHT FRONT COVER. (RRP1.8)
12) Attach FRONT COVER. (RRP1.3)
13) Attach TOP COVER FRAME. (RRP1.1)
14) Attach TRANSFER ROLLER. (RRP5.2)
15) Attach FUSER. (RRP5.1)