Filter
Top Products
8 – 11
Chapter 8 Printer Specifications
4.12 Continuous Printing Speed
Assuming the time until the trailing end of the 11th sheet is discharged after the trail end of the 1st
sheet is discharged as t seconds, number of printed sheets for a minute given by the equation [60/t
×10] is shown in the table below, excluding, however, the time for which the process control is working
is not contained.
This performance capability is provided as an IOT performance which works in the
case where the controller did not keep IOT waiting.
In addition, all of the Tray 1 feeder, MSI feeder, optional single 500-sheet feeder and
optional double 500-sheet feeder satisfy the following performance values.
Reference: Unit "PPM" stands for "prints per minute" indicating number of prints per minute.
"ipm" is abbreviation of "Impression Per Min", and indicates "number of printed
sides per minute" for Duplex.
*1 Depending on paper size (small size), print speed might slow down.
*2 ipm (impression per minutes):For Duplex printing, ipm is determined with print speed at each
side.
Print mode
Letter SEF *1 A4 SEF
Simplex Duplex Simplex Duplex
(ppm) (ipm)*2 (ppm) (ipm)*2
B/W
Full speed mode 42.0 24.5 40.0 24.0
Medium speed mode 21.0 13.5 20.0 13.1
Low speed mode 14.0 9.2 13.3 8.9
Color
Full speed mode 36.6 21.3 35.0 20.8
Medium speed mode 21.0 13.5 20.0 13.1
Low speed mode 14.0 9.2 13.3 8.9