Filter
Top Products
3 - 119
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP5.8 MULTIPURPOSE FEEDER (MPF) ACTUATOR (PL.5.3.15)
[Removal]
1) Remove FUSER. (RRP5.1)
2) Remove TRANSFER ROLLER. (RRP5.2)
3) Remove TOP COVER FRAME. (RRP1.1)
4) Remove FRONT COVER. (RRP1.3)
5) Remove RIGHT FRONT COVER. (RRP1.8)
6) Remove LEFT FRONT COVER. (RRP1.11)
7) Remove RIGHT SIDE COVER. (RRP1.7)
8) Remove LEFT SIDE COVER. (RRP1.12)
9) Remove COVER ASSY REAR. (RRP1.5)
10) Remove MULTIPURPOSE FEEDER (MPF) TRAY. (RRP1.9)
11) Remove OUTER DUPLEX ASSEMBLY. (RRP5.18)
12) Release the four hooks that fix CHUTE FEED UP to OUTER DUPLEX ASSEMBLY, remove
CHUTE FEED UP.
13) Remove ACTUAOR NO PAPER MSI from the notch of the hole which fixes MULTIPURPOSE
FEEDER (MPF) ACTUATOR to OUTER DUPLEX ASSEMBLY, and pull out
MULTIPURPOSE FEEDER (MPF) ACTUATOR from the other attaching hole to remove
together with SPRING NO PAPER MSI.
14) Remove SPRING NO PAPER MSI from ACTUAOR NO PAPER MSI.
[Replacement]
• There shall be no mistake in attaching orientation of SPRING.
• SPRING shall be securely hooked without fail.
1) Attach SPRING NO PAPER MSI to MULTIPURPOSE FEEDER (MPF) ACTUATOR.
2) Insert one end the MULTIPURPOSE FEEDER (MPF) ACTUATOR into the hole on the side
face of the OUTER DUPLEX ASSEMBLY. Insert the other end of the MULTIPURPOSE
FEEDER (MPF) ACTUATOR into the other notch and attach it.
3) Hook one end of SPRING NO PAPER MSI to MULTIPURPOSE FEEDER (MPF) ACTUATOR
and the other end to OUTER DUPLEX ASSEMBLY.
4) Attach CHUTE FEED UP to OUTER DUPLEX ASSEMBLY, fix it using the four hooks.
5) Attach OUTER DUPLEX ASSEMBLY. (RRP5.18)
6) Attach MULTIPURPOSE FEEDER (MPF) COVER. (RRP1.10)
7) Attach MULTIPURPOSE FEEDER (MPF) TRAY. (RRP1.9)
8) Attach COVER ASSY REAR. (RRP1.5)
9) Attach LEFT SIDE COVER. (RRP1.12)
10) Attach RIGHT SIDE COVER. (RRP1.7)
11) Attach LEFT FRONT COVER. (RRP1.11)
12) Attach RIGHT FRONT COVER. (RRP1.8)
13) Attach FRONT COVER. (RRP1.3)
14) Attach TOP COVER FRAME. (RRP1.1)
15) Attach TRANSFER ROLLER. (RRP5.2)
16) Attach FUSER. (RRP5.1)