Filter
Top Products
2 - 57
Chapter 2 Operation of Diag.
Cassette 3 Turn Clutch
(DO-5c)
1) Turn on the power and enter the Diagnostic Mode.
2) Execute DO-5c. Upon pressing the “ 3 ” key, confirm the
operation noise of the clutch is heard.
3) Press the “CANCEL” key to stop the test.
Combination test is as follows.
NOTE: The Roll Assy Turn of Tray 3 rotates when the DO-2d and DO-
5c are executed. The following procedures are for the technical staff.
1) Remove the 500 Sheet Paper Tray of Tray 2. (Remove the
upper Paper Tray on the cassette number. For example: when
the cassette number is 3, remove the Paper Tray of Tray 2.)
2) Turn on the power and enter the Diagnostic Mode.
3) Execute the DO-2d and DO-5c. Confirm the rotation of the
Roll Assy Turn viewing from the removed Paper Tray portion.
4) Press the “CANCEL” key to stop the Cassette 3 Turn Clutch
test (DO-5c test).
5) Press the “ ” key to display the DO-2d.
6) Press the “CANCEL” key to stop the Option Feed Motor 2
(DO-2d test).
7) Reseat the 500 Sheet Paper Tray.
Motor, Clutch and Solenoid
name (Diag. Code)
Confirmation procedures
Ida_Sec02_050FA
Roll Assy Turn (Cassette 3)
Ida_Sec02_051FA
Roll Assy Turn (Cassette 3)