Filter
Top Products
To enable fax confirmation from the control panel
1. Press Setup.
2. Press 2, and then press 3.
This selects Print Report and then selects Fax Confirmation.
3. Press
to select one of the following, and then press OK.
Off Does not print a fax confirmation report when you send and receive
faxes successfully. This is the default setting.
On Fax Send Prints a fax confirmation report for every fax you send.
On Fax Receive Prints a fax confirmation report for every fax you receive.
Send & Receive Prints a fax confirmation report for every fax you send and receive.
TIP: If you choose On Fax Send or Send & Receive, and scan your fax to send
from memory, you can include an image of the first page of the fax on the Fax
Sent Confirmation report. Press Setup, press 2, and then press 2 again.
Select On from the Image on Fax Send Report menu.
Print fax error reports
You can configure the HP All-in-One so that it automatically prints a report when there is
an error during transmission or reception.
To set the HP All-in-One to print fax error reports automatically
1. Press Setup.
2. Press 2, and then press 3.
This selects Print Report and then selects Fax Error Report.
3. Press
to select one of the following, and then press OK.
Send & Receive Prints whenever there is any kind of fax error. This is the default setting.
Off Does not print any fax error reports.
On Fax Send Prints whenever there is a transmission error.
On Fax Receive Prints whenever there is a receiving error.
Print the fax log
The fax log enables you to print a log of approximately the last 30 fax transactions. If a
fax transaction had an error, the error is indicated by an error code in the fax log.
If necessary (for security purposes, for example), you can easily clear the entire log from
memory. This also deletes any saved faxes from memory.
To print the fax log from the control panel
1. Press Setup.
2. Press 2, and then press 6.
This selects Print Report and then prints the fax log.
Print reports 101