Filter
Top Products
NOTE: If you select Pulse Dialing, some phone system features might not be
available. It can also take longer to dial a fax or phone number.
NOTE: This feature is not supported in all countries/regions. If it is not supported in
your country/region, Tone or Pulse Dialing does not appear in the Basic Fax
Setup menu.
To set tone or pulse dialing from the control panel
1. Press Setup.
2. Press 4, and then press 6.
This selects Basic Fax Setup and then selects Tone or Pulse Dialing.
3. Press
to select an option, and then press OK.
Set the fax speed
You can set the fax speed used to communicate between the HP All-in-One and other
fax machines when sending and receiving faxes. The default fax speed varies by country/
region.
If you use one of the following, setting the fax speed to a slower speed might be required:
• An Internet phone service
• A PBX system
• Fax over Internet Protocol (FoIP)
• An integrated services digital network (ISDN) service
If you experience problems sending and receiving faxes, you might want to try setting
the Fax Speed setting to Medium or Slow.
To set the fax speed from the control panel
1. Press Setup.
2. Press 5, and then press 7.
This selects Advanced Fax Setup and then selects Fax Speed.
3. Press
to select one of the following settings, and then press OK.
Fax speed setting Fax speed
Fast v.34 (33600 baud)
Medium v.17 (14400 baud)
Slow v.29 (9600 baud)
Fax setup
In this section, you will learn how to set up the HP All-in-One so that faxing works
successfully with equipment and services you might already have on the same phone
line as the HP All-in-One.
Fax setup 23