HP (Hewlett-Packard) 5700J Printer User Manual


 
3. Close the lid.
Related topics
Load an original in the automatic document feeder
Clean the HP All-in-One
Select print media
The device is designed to work well with most types of office media. It is best to test a
variety of print media types before buying large quantities. Use HP media for optimum
print quality. Visit the HP Web site at
www.hp.com for more information about HP media.
Tips for selecting and using print media
Understand specifications for supported media
Set minimum margins
Papers to avoid
Tips for selecting and using print media
For the best results, observe the following guidelines.
Always use media that conforms to the device specifications. For more information,
see
Understand specifications for supported media.
Load only one type of media at a time into a tray.
For Tray 1 and Tray 2, load media print-side down and aligned against the right and
back edges of the tray. Tray 2 is available with some models. For more information,
see
Understand supported media types and weights.
Tray 2 is designed to hold only plain paper.
Do not overload the trays. For more information, see
Understand specifications for
supported media.
To prevent jams, poor print quality, and other printing problems, avoid the following
media:
Multipart forms
Media that is damaged, curled, or wrinkled
Media with cutouts or perforations
Media that is heavily textured, embossed, or does not accept ink well
Media that is too lightweight or stretches easily
Cards and envelopes
Avoid envelopes that have a very slick finish, self-stick adhesives, clasps, or windows.
Also avoid cards and envelopes with thick, irregular, or curled edges, or areas that
are wrinkled, torn, or otherwise damaged.
Use tightly constructed envelopes, and make sure the folds are sharply creased.
Load envelopes with the flaps facing up.
Select print media 57