Filter
Top Products
stack of paper against a flat surface, and reload the paper into the input tray. To
continue your print job, press the OK button on the control panel of the HP All-in-One.
To load full-size paper
1. Remove the output tray.
2. Slide the paper-width guide to its outermost position.
3. Tap a stack of paper on a flat surface to align the edges, and then check the paper
for the following:
• Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
• Make sure all the paper in the stack is the same size and type.
Print troubleshooting 167