Filter
Top Products
3. Press or to scroll through the languages. When the language you want to use
appears, press OK.
4. When prompted, press 1 for Yes or 2 for No.
5. Press
or to scroll through the countries/regions. When the country/region you
want to select appears, press OK.
6. When prompted, press 1 for Yes or 2 for No.
Set the date and time
You can set the date and time from the control panel. The date and time format is based
on the language and country/region setting. When you send a fax, the current date and
time are transmitted, along with your name and fax number, as part of the fax header.
NOTE: In some countries/regions, the date and time stamp on the fax header is a
legal requirement.
If the HP All-in-One loses power for more than 72 hours, you might need to reset the date
and time.
To set the date and time
1. Press Setup.
2. Press 6, and then press 3.
This selects Tools and then selects Date and Time.
3. Enter the month, day, and year by pressing the appropriate numbers on the keypad.
Depending on your country/region setting, you might enter the date in a different
order.
4. Enter the hours and minutes.
5. If your time is displayed in the 12-hour format, press 1 for AM, or 2 for PM.
The new date and time settings appear on the display.
Set the scroll speed
The Set Scroll Speed option enables you to control the rate at which text messages
scroll from right to left on the display. For example, if the message is "Aligning
cartridges, please wait.", it will not completely fit in the display and will need to scroll.
This is so that you can read the entire message. You can choose the rate at which it will
scroll: Normal, Fast, or Slow. The default is Normal.
To set the scroll speed
1. Press Setup.
2. Press 7, then press 2.
This selects Preferences and then selects Set Scroll Speed.
3. Press
to select a scroll speed, then press OK.
Set the prompt delay time
The Set Prompt Delay Time option enables you to control the amount of time that passes
before a message prompts you to take further action.
Chapter 4
20 Finish setting up the HP All-in-One